Koala cake with buttercream flowers

I had been given a Molly’s creature creator mould for my birthday in October and I now had the chance to use it!

Making cute animal cakes using buttercream flowers is something I love to do… See my flower hedgehog cake here.

So I thought I’d go along the same lines but using the cake mould.

I chose to make a Koala, they have had an awful time recently and I wanted to celebrate these gentle creatures.

Below are photo’s of baking and making this cute cake. If you want to create your own I give a list of some of the tools needed.

What you’ll need:

Cake batter (400g self raising flour, 150g flour, 400g butter, 400g sugar, 8 eggs, 2tsp vanilla)

Molly’s creature creator standing mould

2 or 3 nifty nozzles

Some standard size piping tips and piping bags

Food colouring

Buttercream (500g butter + 1kg icing sugar)

Sweet Stamps if you want to use similar writing

Rice krispie treats for arms and legs (85g rice krispies, 110g melted marshmellow)

Sugarpaste

Method

Grease your mould or use cake release spray. Fill with cake batter and cook at 140C. It took 1hr 40 mins to cook in my oven.

Allow to cool then trim off excess. Turn out of mould.

Use buttercream to stick the halves together and crumb coat.

Make rice krispie treats and mould into arms and legs. Cover with buttercream.

Use a circle cutter to cut ears from 5mm thick rolled out sugarpaste. Cut in half moon shape. Stick a cocktail stick or dry spaghetti stick into ear so it can be fixed to cake. Allow some time to dry.

Colour your buttercream and put into bags. Start piping large tips first randomly but fairly evenly over cake. Then stset to fill areas with smaller buttercream flowers.

Add the ears and cover with buttercream.

Finally add the fondant nose and eyes.

I usually cover my cake boards in fondant and use sweet stamps acrylic letters to emboss and paint name.

Enjoy

Giant floral cupcake decorating tutorial

Here I share tips to create a unique and impressive giant cupcake.

You’ll need a few things to follow this tutorial:

Silicon cupcake baking mould set

Selection of piping tips including size 1, drop flowers, 2D and leaf tip.

Piping bags

Buttercream

Cake batter (sponge cake approx 5 eggs worth)

Cake release spray

Spatula

Method:

Stage 1 make the chocolate case.

You’ll need approx 300g chocolate. I have found dark chocolate is the easiest to work with.

1. Melt the chocolate slowly.

2. Pour into the cupcake case and tilt the case to pour the chocolate on to the sides. Turn the case whilst tilted to cover all of the inside. You might need to gently shake it forward to reach the final areas.

3. Now put the case in the fridge for about 20mins.

4. To remove chocolate case, hold both sides of silicon mould firmly and pull directly down.

Stage 2 Mix the cake batter and bake.

1. Spray silicon tins with cake release.

2. Fill the cases to approx 3/4 with the cake batter. I bake at 140°C fan oven for about 1hr 30m.

3. Allow to cool completely.

Stage 3 cake into case

1. The sides of the cake will need a trim to allow it to fit into the chocolate case. I also cut the base cake into 2 layers and fill.

2. Cover the cake in buttercream.

3. Gently drop the cake into the chocolate case.

Stage 4 buttercream flowers

1. Using a petal tip pipe 4 or 5 petals onto a flower nail. Repeat 5 times and leave to set. Or refridgerate.

2. Fill a piping bag with blue and white buttercream and pipe drop flowers using 2D tip.

3. Use a rose colour buttercream and pipe swirls with 2D tip. Starting on the inside and swirl out. Maybe 3 or 4 of these around the cake.

4. Use smaller drop flowers to create bunches of flowers around the cake. Fill as much as possible.

5. Pipe leaves around the cake and flowers.

6. Add the first piped flowers that are now cool and set. Carefully stick them to the cake with buttercream. Using a 1 tip add stamen to the flowers.

Try different colour combinations to match your theme.

Thanks for visiting!

Hedgehog Cake Tutorial

Follow this step by step tutorial to create your own flower hedgehog cake

How to make a cute Hedgehog Cake with buttercream flowers as spikes.

This is an original cake design by Little Peach Cakery. I hope you enjoy creating your own little hedgehog cake.

You will need:

Sugarcraft tools – rolling pin, knife, cake smoother, ball tool, small rose petal or circle cutters.

A 5 inch round maderia cake, approx 5 inch tall and domed top.

8 inch cake board and ribbon

2 nifty nozzles, 2 drop flower tips

strong piping bags

Buttercream (1:2 butter and icing sugar)

Sugarpaste

Tylo powder or modelling paste

Food colour gel or paste

Edible glaze (optional)

Method:

1. Bake your cake, let it cool. Cut into 4 even layers.

2. To make the face of the hedgehog first add a little tylo to the sugarpaste to make modelling paste. Make a ball into a point and then with the point upwards squash the ball and use a small rolling pin to flatten the eye area. Cut the shape of the face out.

Make two pea sizes balls for the eyes. And a small square for the nose. I like to add a little edible food gloss to these.

The hands and feet are shaped and marked with a small knife.

I use two rose petal cutters for the ears. The larger using white modelling paste and smaller for cutting the pink modelling paste. I cut a few mm off the bottom of the ears where they will be glued onto the cake.

3. Add buttercream between the cake layers and add a thin coat of buttercream over the whole cake. Smoothing over the dome top. This can be natural dome or carved depending on how the cake has risen.

4. Roll out enough sugarpaste to cover half the cake. Smooth this over the front of the cake. Trim off any excess. Carefully transfer the cake onto a sugarpaste covered cake board.

5. Using edible glue attach the face and nose to the cake. You may want to use a cocktail stick to help hold in place.

6. Add the hands and feet using edible glue. Make a little hole as a belly button. Make 2 indents on the face and add the eyes.

7. Place the ears but do not attach yet. Make a note where they will sit and remove them for now.

8. Mix up several different colours of buttercream. You can add more than one colour to the piping bags to give different tones to the flowers. I like to make the smaller drop flowers white like daisies.

Tip: the buttercream needs to be firm but still able to pipe. Strong piping bags are needed. If the buttercream gets too warm whilst piping flowers pop it in the fridge for 5 mins and try again.

9. Start piping the nifty flowers onto the cake randomly. If you run out of buttercream try adding a different colour buttercream to the bag to give variety to the flowers.

10. Next add the drop flowers to any spaces between the larger flowers.

11. Glue the ears onto the cake.

12. Add a ribbon to the cake board.

And done! Of course you can use different nozzles to create the flowers. And use any colour combinations. I also use elderflower flavoured buttercream to add a more floral taste! I hope you enjoy creating your own cake. Thank you